Installation of Plinths

The plinths are installed after the framing and floor covering have been installed. The plinths are installed using a nail gun which is placed at the top and bottom of the plinth. We must punch the nails with a nail punch to drive the head and put a wood paste to hide them. We must finalize everything with a coat of paint, stain or varnish.

Installation of Framing

Frames are installed using a nail gun. You have to go gently so as not to split the molding. You must start with the head molding before laying the sides. For cutting, cut at a right angle if you install rosettes in the corners, otherwise cut at a 45-degree angle.